Aftermarket Replacement Cushion

Replacement Cushion
for AirFit F20

A translucent silicone full-face cushion built to the F20 mounting geometry. It presses into the frame used across the AirFit F20, AirFit F20 For Her, AirTouch F20 and AirTouch F20 For Her. Medium shown on this page; Small and Large use the identical mounting.

Silicone cushion Sizes S / M / L Clicks into the F20 frame Cushion only — no frame
At a glance
01
F20 frame platform
AirFit F20 · AirTouch F20
02
Three sizes, one frame
S · M · L press into the same frame
03
Cushion only
Frame, elbow and headgear not included
04
B2B supply
Bulk packs · private label
Product Details

The part, up close.

Photographs show the cushion as supplied. Dimensions given below refer to the Medium variant shown on this page.

Fitting the replacement silicone cushion onto the full-face mask frame by hand
Fitting the cushion to the frame — presses on and pulls off by hand, no tools
01 — FITTING

Press on, pull off

The cushion pulls away from the frame by hand; the replacement presses over the frame ring until it seats. The frame stays on the headgear and nothing has to be unscrewed.

02 — SIZE

Size letter on the base

Each cushion carries its size letter moulded into the base. Send us the letter from the cushion you are replacing and we match it. Where a face measures between two sizes, the larger cushion is usually the better choice.

Technical Information

Specifications.

Measured from the Medium cushion shown above. Other sizes share the same mounting geometry.

Wear part: silicone cushions are typically replaced every 1–3 months depending on use and care. Wash in warm water with mild soap, air-dry away from direct sunlight, and avoid alcohol-based cleaners.
ProductReplacement cushion (aftermarket) for the AirFit F20 full-face mask
Compatible framesAirFit F20, AirFit F20 For Her, AirTouch F20, AirTouch F20 For Her — the F20 series shares one frame platform; the cushion clicks into the same frame
SizesSmall / Medium / Large — same mounting for all three; Medium shown on this page
MaterialTranslucent silicone, one-piece molded
Dimensions (Medium)Approx. 12.0 × 11.0 × 7.5 cm (length × width × height)
Size markingS / M / L letter printed on the cushion base
FitsThe F20 frame platform only — cushion systems from other mask series are not interchangeable with it
Country of originChina
PackagingIndividually bagged; bulk cartons or retail-ready packaging quoted per order
From Inquiry to Order

A clear process. Confirmed details.
Fewer surprises.

Set expectations at each stage of a B2B order—from the first product reference to final order confirmation.

AirFit F20 replacement silicone cushion, upright view
SILICONE CUSHION — ACTUAL SUPPLIED ITEM01 — 03
01
SIZE & REFERENCE

Confirm what you need

Send the size letter from the current cushion, the mask model, and the estimated quantity. We match the variant and flag anything that needs a sample first.

Output — Confirmed size and variant
02
SAMPLE REVIEW

Check the part before committing

For first-time orders we recommend a sample so your team can verify the mounting, seal and packaging against the reference. Sample policy is quoted with the offer.

Output — Sample evaluated
03
ORDER & DISPATCH

Written confirmation, then production

Quantity, packaging, labeling and delivery terms are recorded in a written order confirmation before production starts.

Output — Order confirmed and dispatched
Procurement Support

Plan the supply around a wear part.

Cushions are replaced on a rolling cycle, so demand is recurring rather than one-off. These are the three inquiry paths we handle most often.

01 / VOLUME

Volume & Repeat Orders

Because the cushion is a 1–3 month wear part, end customers reorder continuously. Discuss forecast volumes, rolling orders, and mixed-size cartons (S/M/L in one shipment).

Discuss volume
02 / SAMPLE

Sample Evaluation

Request a Medium-cushion sample to check the mounting geometry and sealing surface against your reference part before committing to volume.

Ask about samples
03 / CUSTOM

OEM / ODM Discussion

Private-label packaging, custom carton quantities, and labeling for your market — scope and tooling are reviewed case by case against this cushion platform.

Discuss customization
Request for Quotation

Tell us the size, quantity, and market.

Include the size letter from the current cushion and your destination market if you can. We reply with pricing, packing options, and sample terms for the F20 cushion platform.

For a faster review
Size (S / M / L), mask model in use, estimated quantity per order, and whether you need retail or bulk packaging.

Cart

loading