Confirm what you need
Send the mask model the elbow has to fit, the quantity, and whether the current part has a swivel with ports or a plain elbow. We match the variant and flag anything that needs a sample first.
Output — Confirmed part referenceThe link between the F20 mask frame and the CPAP hose: a swivelling ring with exhaust ports on top, two clips at the base, and a valve flap inside the clear housing. Elbow only — frame, cushion and hose are separate items.
The elbow is a small part, but every feature on it is there for a reason. Photographs show the component as supplied.
The top ring turns, so the hose can swing with the sleeper instead of tugging the mask off the face.
A ring of small ports around the swivel releases exhaled air gradually rather than in a single jet.
Two clips hold the elbow in the frame port. Squeeze them together and the elbow pulls straight out.
A flap sits inside the clear housing. Check that it lies flat and moves freely whenever the elbow is washed.
Two things decide how long an elbow lasts in service: how it comes off the frame, and how it is washed.
The elbow pushes into the frame port until both clips seat. To remove it, squeeze the two side clips together and pull the elbow straight out — no tools, and the cushion stays on the frame.
Wash in warm water with mild soap and rinse through the vent ring. Air-dry away from direct sunlight. Avoid alcohol wipes on the clear housing — they cloud it.
Describes the elbow shown on this page. Everything listed is visible on the supplied component.
| Product | Replacement elbow connector for the F20 full-face mask frame |
|---|---|
| Function | Links the mask frame to the CPAP hose; carries the swivel ring, exhaust ports and valve flap |
| Fits | The F20 frame platform only — elbow systems from other mask series are not interchangeable with it |
| Hose end | Swivelling ring with a ring of exhaust ports |
| Frame end | Two side clips — hand fitted, hand released |
| Valve | Flap inside the clear housing |
| Material | Moulded plastic body with a transparent housing |
| Colour | White body, translucent housing |
| Size | One size for the F20 frame |
| In the pack | Elbow connector only — frame, cushion, headgear and hose are separate items |
| Care | Warm water and mild soap; rinse through the vent ring; air-dry away from direct sunlight |
| Country of origin | China |
| Packaging | Individually bagged; bulk cartons or retail-ready packaging quoted per order |
Set expectations at each stage of a B2B order—from the first product reference to final order confirmation.
Send the mask model the elbow has to fit, the quantity, and whether the current part has a swivel with ports or a plain elbow. We match the variant and flag anything that needs a sample first.
Output — Confirmed part referenceFor first-time orders we recommend a sample so your team can check the clip fit, the swivel action and the packaging against the reference. Sample policy is quoted with the offer.
Output — Sample evaluatedQuantity, packaging, labeling and delivery terms are recorded in a written order confirmation before production starts.
Output — Order confirmed and dispatchedElbows go missing, get cracked in transit and get replaced after a clip fails. Demand runs steady rather than seasonal — these are the three inquiry paths we handle most often.
Because the elbow is handled daily and lost or cracked more often than the frame, customers keep it on a standing order. Discuss forecast volumes, rolling releases, and mixed cartons with other F20 spares.
Discuss volumeRequest a sample to check the clip fit on your frame, the swivel action, and how the ports are finished before committing to volume.
Ask about samplesPrivate-label packaging, custom carton quantities, and labeling for your market — scope and tooling are reviewed case by case against this elbow.
Discuss customizationInclude the mask model the elbow has to fit and your destination market if you can. We reply with pricing, packing options, and sample terms for this elbow.
loading